R&S ENV432
Introduction
User Manual 1326.6492.04 - 03
E-10
2.2 Rear View
This figure shows the rear view of the R&S ENV432. The individual elements are
described in more detail in the subsequent sections.
Fig. 2
Rear View
1 = Remote control input
2 = Ground terminal
3 = CEE built-in connector, three-phase (MAINS)
4 = Protective earth terminal
5 = Mains voltage input for auxiliary voltage and selection of mains voltage
2.2.1 Remote Control
25-contact D-Sub terminal, female, for connecting the remote control cable.
2.2.2 Ground Terminal (
)
4 mm connector, female, for connecting the reference ground during calibration.
2.2.3 CEE built-in connector
CEE built-in connector for connecting the supply voltage.
