Four customizable profiles
9
LOCALIZING THE LEAKAGE
1
2
1
1
2
1
GETTING READY
3
4
2
SEARCHING FOR LEAKAGE
2
R&S
®
EFL110/210
h t t p : / / w w w . r o h d e - s c h w a r z . c o m
Connect the antenna to the RF input of the
R&S
®
EFL110/210:
Press to switch on the amplifier of the
R&S
®
EFL-Z100
antenna
Press to activate the Search Leakage Mode
Move the antenna (or drive your car) until the
R&S
®
EFL110/210
detects a leak:
After the alarm, press button. The
R&S
®
EFL110/210
zooms
ont the frequency of the leak and activates the tone generator function
R&S
®
EFL110/210
LEAKAGE DETECTION IN LTE BAND (withR&S®EFL-Z100)
Press to switch to the leakage detection mode
Press multiple times until the LTE band is active
Indicates LTE Band
Indicates Cable Leakage!
and soud an alarm
OPTIONAL: Press for the AUTO CONFIG. function.
It adjusts the screen for an optimum display.
This is useful after a significant change in power level.
OPTIONAL: Press to activate the FRAME BEEP
The
R&S
®
EFL110/210
sounds a beep every time the waterfall is
refreshed.
Watch the waterfall after every beep in order not to miss anything
Move the antenna. The pitch of the tone change with the signal level.
The highest pitch means thar the antenna is pointing at the leak.
OPTIONAL: Press for >1 sec.
Use to adjust the threshold of the tone generator. The red dashed line should be higher than the highest signal peak.
