Command Reference
R&S
®
CMW500
200
User Manual 1173.9463.02 ─ 02
.....................................................................................201
CLEar:BASE:BUFFer
'<BufferLabel>'
Clears the contents of a buffer, maintaining the buffer for further program execution. Use
to delete the buffer.
Parameters:
'<BufferLabel>'
String parameter, used to identify the buffer in all buffer commands
Example:
See
Usage:
Event
Firmware/Software:
V2.1.10
CONTinue:BASE:BUFFer
'<BufferLabel>'
Re-activates a buffer which was intermediately de-activated (
). The
R&S CMW500 will continue writing data to the buffer.
Parameters:
'<BufferLabel>'
String parameter, used to identify the buffer in all buffer commands
Example:
See
Usage:
Event
Firmware/Software:
V2.1.10
DELete:BASE:BUFFer
'<BufferLabel>'
to delete the buffer contents, maintaining
the buffer for further program execution.
Parameters:
'<BufferLabel>'
String parameter, used to identify the buffer in all buffer commands
Example:
See
Usage:
Event
Firmware/Software:
V2.1.10
FETCh:BASE:BUFFer?
'<BufferLabel>', <LineNo>
Reads the contents of a buffer line no. <LineNo>. Buffer contents are stored line by line:
Every program line in a command macro containing queries generates a single new buffer
line. The queries are not stored together with the results.
Reading buffer contents is non-destructive. The lines can be read in arbitrary order.
Instrument-Control Commands
