GUI Reference
R&S
®
CMW-KM645
22
User Manual 1173.9740.02 ─ 04
Frequency Offset
Positive or negative frequency offset to be added to the specified center frequency of
the RF analyzer.
Remote command:
CONFigure:FMSTereo:MEAS<i>:RFSettings:FOFFset
4.2.2 Measurement Control Settings
The "Measurement Control" parameters configure the scope of the measurement.
See also: "Statistical Settings" in the R&S
CMW user manual, chapter "System Over-
view"
Fig. 4-2: FM Stereo Radio Configuration: Measurement Control
Repetition
Defines how often the measurement is repeated if it is not stopped explicitly or by a
failed limit check.
●
Continuous:
The measurement is continued until it is explicitly terminated; the
results are periodically updated.
●
Single-Shot:
The measurement is stopped after one statistics cycle.
Parameters and Settings
深圳德标仪器
135-1095-0799
