manualshive.com logo in svg

Rohde & Schwarz CLIPSTER 6 Mk2, User Manual

Share
Download
Rohde & Schwarz CLIPSTER 6 Mk2 User Manual Download Page 33

Installation and Operation

33

User Manual (Hardware) | 2904.4460.02 - 04

Lifting and Carrying

CLIPSTER

Installation and Operation

This chapter describes the installation and operation of the CLIPSTER

 

hard-

ware. The system must be installed properly before you can start working 
with it.

This chapter is divided into the following topics:

●

Unpacking the System  (page 33)

●

Mounting the System into a Rack  (page 34)

●

Connecting Monitor, Mouse and Keyboard  (page 38)

●

Operating the System  (page 39)

Lifting and Carrying

We recommend to use lifting equipment, see also "Lifting and Carrying the 
Product"  on page 8.

Unpacking the System

Perform the following steps:

1.

Unpack the product carefully.

2.

Retain the original packing material. Use it to protect the control 
elements and connectors when transporting or shipping the product later.

3.

Check your delivery and compare it with the delivery note. In case of 
missing items, please contact your vendor or R&S immediately.

4.

Place the system on a flat surface to prepare it for mounting into the 
rack.

The system is unpacked and ready for installation.

Risk of Injury

Lifting the system by yourself may result in serious injury and property 
damage.

Do not attempt to lift the system by yourself, always get others to 
assist you.

Summary of Contents for CLIPSTER 6 Mk2















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands