Product Description
27
User Manual (Hardware) | 2904.4460.02 - 04
Overview of the Rear
CLIPSTER
ATX Panel
The ATX connector panel on the rear of the R&S system holds the connec-
tors of the computer system. It provides the following connections:
ATX Panel Connectors
COM1 Port
RS232 connector for the connection of serial interface
devices.
LAN RJ-45 (IPMI)
1 Gb Ethernet connection port to connect the system to a
network.
USB 3.1 Gen2 (type C)
A type-C USB to connect external devices to the system.
System ID Indicator
Press to trigger the ID LED located on the front of the
system. Useful e.g. to locate the system within a rack
among many other systems, see also informative section
in "Operation Panel" on page 19.
VGA
DB-15 connector (female) to connect a monitor to the
system.
USB 3.1 Gen1
USB connectors to connect external devices to the
system.
2 x LAN RJ-45
2 x 10 Gb Ethernet connection ports to connect the
system to a network.
VGA
2 x USB 3.1 Gen1
2 x LAN RJ-45, 10Gbit
COM1 port
LAN RJ-45 (IPMI), 1Gbit
USB 3.1 Gen2 (type C)
System ID
Indicator
