Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 133 / 314

Working with the Measurement Wizard
R&S
®
Cable Rider ZPH
98 User Manual 1321.0950.02 ─ 03
Softkey Description
Save Result Save result of the measurements performed in the
wizard set. See
"Measurements Result"
on page 98
Discard Result Discard measurement results.
Measurements Result
Limited internal memory
If you have to store the results on the internal memory, make sure that there is enough
space left to store them or else the results might get lost. If the space is not enough,
you can delete old data with the file manager.
For more information, see
Deleting Datasets .
Measurement wizard results
All the measurement wizard results are stored in the wizard result folder during the
process of the measurement wizards. These stored results will not be saved until you
do a
Save Result at the end of the wizard measurement.
The results for a measurement set consist of a number of files, each file corresponding
to one of the performed measurements. For easy evaluation, the R&S Cable Rider
ZPH includes the name of the measurement as defined in the wizard dialog or R&S
InstrumentView.
All result files that belong to a measurement set are stored in the same directory. The
directory is named after the measurement name and site. The syntax is 'site-
name_measurement_#'.
The R&S Cable Rider ZPH adds numbers in ascending order to the files as well as
directories if you perform a measurement or measurement set more than once.
6.2 Evaluating Results
The R&S InstrumentView software package provides functionality to evaluate results
and compile measurement reports. However, before you can start to evaluate the
results you have to download the results to your computer. See
"Data synchronization"
on page 82.
The report generator function in R&S InstrumentView allows you to create measure-
ment reports for the full measurement set or a selection of dataset only. You can also
perform simple tasks like activating or deactivating markers that have been set during
the measurement.
1. Select the "Report Generator" menu item in the R&S InstrumentView
The R&S InstrumentView opens the "Report Generator" dialog box that provides all
functionality to manage measurement sets.
Evaluating Results