Rohde & Schwarz AREG100A, User Manual, Page: 85 / 321

File and Data Management
R&S
®
AREG100A
85 User Manual 1178.7417.02 ─ 04
To save complete instrument settings
1. Select "System Config > Save/Recall" > "Operation Mode > Save".
2. In the file selection dialog, select a filename and storage location for the settings
file.
3. Select "Save".
A file with the defined name and path and the extension
*.savrcltxt
is created.
To restore instrument's configuration
Save the configuration as described in "To save complete instrument settings"
on page 85.
1. To restore settings, select "System Config > Save/Recall" > "Operation Mode >
Recall".
2. To retain the current frequency and level settings, enable "Save/Recall > Exclude
Frequency/Level"
3. In the file selection dialog, select the filename and storage location of the settings
file.
The settings are restored, but the frequency and level settings are retained; you
can repeat the signal generation with the same settings.
See also
Chapter 6.2.3, "How to Recall User Settings Automatically after Preset" ,
on page 79.
6.5 Exporting Remote Command Lists
To set specific instrument settings or perform tasks automatically, you can create
scripts that contain the settings in the form of remote control command sequences.
The R&S AREG100A also offers an SCPI macro recorder with code generator that is
used to record manual settings and create an executable script, see Chapter 8.14,
"How to Record / Create SCPI Lists" , on page 173.
Completed scripts are stored in files and possibly converted to different formats,
depending on the used language of the source code.
The R&S AREG100A supports the following commonly used languages:
●
Plain SCPI:
*.txt
●
MATLAB:
*.m
●
NICVI:
*.c
It is also possible to convert the SCPI command list to a user-specific language, see
Chapter 8.15, "How to Convert and Save SCPI Lists" , on page 176.
Exporting Remote Command Lists