Rohde & Schwarz AREG100A, User Manual, Page: 56 / 321

Radar Echo Generation
R&S
®
AREG100A
56 User Manual 1178.7417.02 ─ 04
Settings
Object 1 | 2 | 3 | 4 .......................................................................................................... 56
State ..............................................................................................................................56
Range ............................................................................................................................56
Attenuation .................................................................................................................... 57
Doppler Speed .............................................................................................................. 57
RCS ...............................................................................................................................57
Object 1 | 2 | 3 | 4
A maximum of four radar objects can be configured. The objects are defined by the
"Range" (see
"Range" on page 56).
State
The specific radar object can be active or inactive.
●
: Object is active
●
: Object is inactive
Remote command:
[:SOURce<hw>]:AREGenerator:OBJect:ALL[:STATe]
on page 244
[:SOURce<hw>]:AREGenerator:OBJect<ch>[:STATe]
on page 246
Range
Defines the range for a specific object. The range can be displayed in different units
(see
"Unit Settings" on page 59). Following options are available.
●
Option: R&S AREG-B61
This option offers a fixed artificial object in a distance of 3.2 m + air gap.
●
Option: R&S AREG-B62
GUI Elements