General Instrument Functions
R&S
®
AREG100A
125
User Manual 1178.7417.02 ─ 04
User Name
Indicates the user name used for access to the Linux operating system and valid for
VNC, FTP and SMB (Samba) access.
User Password
Access: select "System Config > Setup > Security > Security > Password Management
> User Password".
Allows you to change and confirm the user password.
Old Password ← User Password
Enters the current user password. The default password is "instrument".
Note:
We recommend that you change the default password before connecting the
instrument to a network.
New Password ← User Password
Enters the new user password.
The security password can contain decimal characters only.
Confirm Password ← User Password
Confirms the new user password by repeating.
Note:
The new password is not assigned until you select the
Change Password ← User Password
Changes the user password accordingly.
Security Password
Access: select "System Config > Setup > Security > Security > Password Management
> Security Password".
Enables you to change and confirm the security password.
Old Password ← Security Password
Enters the currently used security password. The default password is '123456'.
Note:
We recommend that you change the default password before connecting the
instrument to a network.
The security password is required when changing the status of the USB and LAN inter-
face.
New Password ← Security Password
Enters the new security password.
The security password can contain decimal characters only.
Confirm Password ← Security Password
Confirms the new security password by repeating.
Note:
The new password is not assigned until you select
Change Password ← Security Password
Changes the password accordingly.
Using the Security Settings