Rohde & Schwarz AREG100A, User Manual, Page: 103 / 321

General Instrument Functions
R&S
®
AREG100A
103 User Manual 1178.7417.02 ─ 04
7.1.1 Display and Keyboard Settings
Access:
1. Select "System Config > Setup > User Interface > Display/Keyboard > Display".
2. Select "Display/Keyboard > USB Keyboard".
In the "Display/Keyboard" dialog, you can change regional and language options
for the GUI and an external keyboard, and define the screen saver settings.
The remote commands required to configure the display and keyboard are described in
Chapter 9.5, "DISPlay Subsystem" , on page 197 and Chapter 9.8, "KBOard Subsys-
tem" , on page 208.
Screen Saver .............................................................................................................. 103
Wait Time .................................................................................................................... 103
Display ........................................................................................................................ 104
RF Hardkey ................................................................................................................. 104
USB Keyboard > Layout ..............................................................................................104
Screen Saver
Activates the screensaver.
If activated, the display including backlight is switched off after the selected Wait Time
elapses and if no entries via touch panel, front panel, external mouse, or external key-
board are made
Remote command:
:DISPlay:PSAVe[:STATe]
on page 198
Wait Time
Enters the idle time that must elapse before the display lamp is shut off when no
entries are made.
Customizing the User Interface