manualshive.com logo in svg

Rohde & Schwarz 395.0512.02, Manual

Share
Download
Rohde & Schwarz 395.0512.02 Manual Download Page 7

Voltage Sensors ¸URV5-Z

 

3

Four types of meters are available for volt-
age and power measurements. 

Meters

¸URV35

compact voltmeter and power meter for 
use in service, testshops and labs. unique 
combination of analog and digital display 
in the form of moving-coil meter plus LCD. 
Many measurement functions, display in 
all standard units, choice of battery or AC 
supply operation, RS-232-C interface. All  
sensors are suitable. 

¸URV55

Attractively priced, single-channel volt-
meter. Many measurement functions, 
display of results in all standard units, 
analog output comes as standard, 
IEC/IEEE bus connector. All  sensors are 
suitable. 

¸NRVD

Modern dual-channel power meter with 
menu operation and IEC/IEEE bus con-
nector (SCPI). Ideal for relative measure-
ments in two test channels (attenuation, 
reflection). Large variety of measurement 
functions, display of results in all stan-
dard units. Many extras like 1 mW test 
generator, indication of measurement 
uncertainty, etc. All  sensors are suitable. 

¸NRVS

Attractively priced, single-channel power 
meter, similar to the ¸URV 55. All  
sensors are suitable.

Summary of Contents for 395.0512.02

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands