Rohde & Schwarz 1440.8002.02, Getting Started

Page: 31 / 95

Instrument tour
R&S
®
SMM100A
31 Getting Started 1179.1335.02 ─ 04
A touchscreen is a screen that is touch-sensitive. It reacts in a specified way
when a particular element on the screen is tapped by a finger. Any user interface
element that can be clicked by a mouse pointer can also be tapped on the screen
to trigger the same behavior.
Using the touchscreen, the following tasks (among others) can be performed by
the tap of your finger:
●
Changing a setting
●
Selecting new settings
●
Scrolling through the list of parameters
●
Saving or recalling settings
●
Opening and closing dialogs
See also:
●
Chapter 7, "Instrument control" , on page 75, for operating the touchscreen.
●
"Cleaning" in the user manual, for instructions on cleaning the screen.
4.1.2 Keys
4.1.2.1 Utility keys
The utility keys cause the R&S SMM100A to return to a defined instrument state
and provide information on the instrument and assistance.
For more information, refer to chapter "General Instrument Functions" in the user
manual.
Table 4-1: Utility keys
Utility key Assigned functions
[Preset] Sets the instrument to a defined state
[Save/Rcl] Saves and loads instrument setting
Accesses the file manager
[Local] Switches from remote control to local (manual) control
[Setup] Accesses the general instrument settings
[HCOPY] Opens the "Hardcopy" dialog for storing the current display in a file
Front panel tour