Safety and regulatory information
R&S
®
NRT2
9
User Manual 1178.5550.02 ─ 04
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
Combined with a supported R&S
NRT
‑
Zxx directional power sensor, the R&S NRT2
base unit is intended for power and reflection measurements in development and for
monitoring and maintenance purposes. The supported R&S
NRT
‑
Zxx directional power
sensors are listed in the data sheet. Observe the operating conditions and perfor-
mance limits stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and experience
in power and reflection measurements depend on the used operating concept. While
manual operation is suitable for beginners, remote control requires expertise in power
and reflection measurements.
Main applications are continuous monitoring of transmitter systems and power mea-
surements with digital modulation. A profound knowledge of the intended application
and test setup is recommended.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
Chapter 1.1, "Safety Instructions"
on page 9. The same information is provi-
ded in many languages as printed "Safety Instructions". The printed "Safety
Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1
Safety Instructions
Products from the Rohde
&
Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the data sheet,
manuals and the printed "Safety Instructions". If you are unsure about the appropriate
use, contact Rohde
&
Schwarz customer service.
Safety Instructions
