Rohde & Schwarz 1424.7805K02, User Manual

Page: 487 / 530

Remote control basics
R&S
®
NRX
487 User Manual 1178.5566.02 ─ 09
14.4.8 Operation status register
Contains information on current operations,
CONDition
register, or operations per-
formed since the last query,
EVENt
register.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Operation CAL Summary
0
0
0
Operation Measurement Summary
Operation Trigger Summary
0
0
0
0
Operation Sense Summary
Lower Limit Fail
Upper Limit Fail
0
0
0
+
Figure 14-9: Operation status register
Querying the register:
●
STATus:OPERation:CONDition?
●
STATus:OPERation[:EVENt]?
Table 14-11: Used operation status bits and their meaning
Bit no. Short description Bit is set if
0 Operation CAL summary Summary of Operation calibrating status register exists.
4 Operation measurement summary Summary of Operation measuring status register exists.
5 Operation trigger summary Summary of Operation trigger status register exists.
10 Operation sense summary Summary of Operation sense status register exists.
11 Lower limit fail Summary of Operation lower limit fail status registers exists.
12 Upper limit fail Summary of Operation upper limit fail status registers exists.
14.4.8.1 Operation calibrating status register
The
CONDition
register contains information whether a power sensor is being calibra-
ted. The
EVENt
register contains information whether a calibration was started or com-
pleted since the last query.
Status reporting system