Safety and regulatory information
R&S
®
NRX
5
Getting Started 1424.7070.02 ─ 09
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
Combined with the supported R&S
power sensors, the R&S NRX base unit is
intended for power measurements in development and production. The supported
R&S
power sensors are listed in the data sheet. Observe the operating conditions
and performance limits stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and expe-
rience in power measurements depend on the used operating concept. While
manual operation is suitable for beginners, remote control requires expertise in
power measurements.
Depending on the used R&S
power sensor, the applications vary greatly. A pro-
found knowledge of the intended application and test setup is recommended.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In
Chapter 1.1, "Safety Instructions"
on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety Instructions
Products from the Rohde
&
Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Safety Instructions
