Remote-control commands
DVB-H
55
Operating Manual 1008.0970.12 ─ 16
Parameters:
<Mode>
VECTor | SCALar
VECTor
The reference level is the amplitude | i+jq |.
SCALar
The reference level is the absolute maximum of the I and Q val-
ues.
*RST:
VECTor
Example:
BB:DVB:CLIP:MODE VECT
sets the amplitude as reference level.
Manual operation:
See
[:SOURce<hw>]:BB:DVB:CLIPping:STATe
<State>
The command activates level clipping. The value is defined with the com-
mand
:BB:DVB:CLIPping:LEVel
, the mode of calculation with the com-
mand
:BB:DVB:CLIPping:MODE
.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
OFF
Example:
BB:DVB:CLIP:STAT ON
activates level clipping.
Manual operation:
See
4.1.4 Trigger Settings
EXTernal<ch>
The numeric suffix to
EXTernal<ch>
distinguishes between the external trigger via
the TRIGGER 1 (suffix 1) and TRIGGER 2 (suffix 2) connector.
[:SOURce<hw>]:BB:DVB:TRIGger:ARM:EXECute
.............................................................. 56
[:SOURce<hw>]:BB:DVB:TRIGger:EXECute
.......................................................................56
[:SOURce<hw>]:BB:DVB:TRIGger:EXTernal:SYNChronize:OUTPut
..................................... 56
[:SOURce<hw>]:BB:DVB:TRIGger:OBASeband:DELay
....................................................... 57
[:SOURce<hw>]:BB:DVB:TRIGger:OBASeband:INHibit
....................................................... 57
[:SOURce<hw>]:BB:DVB:TRIGger:RMODe?
...................................................................... 58
[:SOURce<hw>]:BB:DVB:TRIGger:SLUNit
..........................................................................58
[:SOURce<hw>]:BB:DVB:TRIGger:SLENgth
.......................................................................58
[:SOURce<hw>]:BB:DVB:TRIGger:SOURce
....................................................................... 59
[:SOURce<hw>]:BB:DVB:TRIGger[:EXTernal<ch>]:DELay
...................................................59
[:SOURce<hw>]:BB:DVB:TRIGger[:EXTernal<ch>]:INHibit
...................................................60
[:SOURce<hw>]:BB:DVB[:TRIGger]:SEQuence
.................................................................. 60
General Commands
Summary of Contents for 1402.9557.02
Page 8: ...Preface DVB H 8 Operating Manual 1008 0970 12 16 Conventions Used in the Documentation ...
Page 44: ...DVB H User Interface DVB H 44 Operating Manual 1008 0970 12 16 Trigger Marker Clock Settings ...
Page 76: ...Remote control commands DVB H 76 Operating Manual 1008 0970 12 16 TPS Settings ...