Rohde & Schwarz 1402.9557.02 Operating Manual Download Page 14 | Manualshive

Page: 14 / 80

background image

Introduction

DVB-H

14

Operating Manual 1008.0970.12 ─ 16

2.1.8 Transport Parameter Signalling

The Transport Parameter Signalling (TPS) carriers are used to signalling parameters
related to the transmission scheme. The TPS is transmitted parallel on 17 TPS carriers
for the 2K mode, 34 carriers for the 4K mode, and 68 carriers for the 8K mode. Every
TPS carrier in the same symbol conveys the same differentially encoded information
bit.

The TPS parameter bits are described in

chapter 3.3, "TPS Settings"

2.2 Extensions to DVB-T

The Digital Video Broadcasting - Handheld (DVB-H) standard is based on the earlier
standard DVB-T, which is used for terrestrial digital broadcasting.

DVB-H provides features to meet the specific requirements for handheld, mobile termi-
nals such as:

●

power off some part of the reception chain to increase the battery duration

●

ease access to the services when receivers switching to the next cell

●

migitate the effects of man-maid noise and severe mobile multipath channels on
the receiving capabilities

●

offer sufficient flexibility and scalability to allow reception of services at various
speeds

●

offer the flexibility to be used in various transmission bands and channel bandwiths

The basic technical extensions that make it possible to receive digital video broadcast-
ing services on handheld terminals are:

●

4K Mode and In-Depth Interleavers

●

Time-Slicing

●

Forward Error Correction for Multiprotocol Encapsulated Data (MPE-FEC)

2.2.1 4K Mode and In-Depth Interleavers

The additional 4K mode is an trade-off between transmission cell size and mobile
reception capabilities to improve network planning flexibility. The 4K mode is suitable
for single transmitter operation and for small and medium single frequency networks
(SFN). It provides a Doppler tolerance allowing very high speed reception. The mobile
reception is faster compared to the 8K mode and the cell size is bigger compared to
the 2K mode.

The additional in-depth interleavers increase the flexibility of the interleaving for the 2K
and 4K mode. The depth of the inner interleaver is enlarged to four consecutive OFDM
symbols (2K) or to two consecutive OFDM symbols (4K).

Extensions to DVB-T

«
...
12
13
14
15
16
...
»

Summary of Contents for 1402.9557.02

















































































Reviews:

No comments

Related manuals for 1402.9557.02

Brand: Arwin Pages: 32

Brand: Tivax Pages: 31

Brand: Power Stroke Pages: 48

Brand: R&S Pages: 79

Powermate PM0401856

Brand: Coleman Pages: 12

Brand: Curtis Pages: 15

Brand: PISCO Pages: 68

Brand: Curtis Pages: 29

Coaxials 12CX32

Brand: B&C Speakers Pages: 2

Brand: Honda Pages: 55

Pulse Generator Module VX462B

Brand: C&H Pages: 1

Brand: Roadstar Pages: 31

Brand: Tait Pages: 104

Brand: E-Boda Pages: 8

Brand: SNOWJOE Pages: 84

Brand: Homelite Pages: 60

Brand: LEGRAND Pages: 2

REVCON SVCS Series

Brand: Eltroplan Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands