Rohde & Schwarz 1332.4500.22, User Manual

Page: 1124 / 1476

Command Reference
R&S
®
ZNA
1124 User Manual 1178.6462.02 ─ 12
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt> Port number of the analyzer. This numeric suffix is ignored; the
active port is determined by the active trace.
Setting parameters:
<Activate> ONCE
Applies the "Auto Length and Loss" function.
Example: *RST; :CORR:LOSS:AUTO ONCE
Reset the instrument and apply the "Auto Length and Loss"
function to the default trace (Trc1 in channel 1).
Usage: Setting only
Manual operation: See "Auto Length and Loss" on page 568
[SENSe<Ch>:]CORRection:LOSS<PhyPt>:FREQuency <RefFreq>
Defines the reference frequency for the frequency-dependent part of the offset loss
(
[SENSe<Ch>:]CORRection:LOSS<PhyPt>:OFFSet
).
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt> Port number of the analyzer
Parameters:
<RefFreq> Reference frequency
Range:
Frequency range of the analyzer model.
Increment: 1 MHz
*RST:
1000000000 Hz (= 1 GHz)
Default unit: Hz
Example: See
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
Manual operation: See "Loss at DC / Loss at Freq / Freq for Loss" on page 567
[SENSe<Ch>:]CORRection:LOSS<PhyPt>:OFFSet <OffsetLoss>
Defines the frequency-independent part (DC value) of the offset loss.
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt> Port number of the analyzer
Parameters:
<OffsetLoss> Frequency-independent part of the offset loss
Range:
-200 dB to +200 dB
Increment: 0.001 dB
*RST:
0 dB
Default unit: dB
SCPI Command Reference