Remote Commands
R&S
®
Spectrum Rider FPH
456
User Manual 1321.1011.02 ─ 11
List of Commands
CALCulate<1...2>:LIMit<1...2>:BEEP[:STATe]
................................................................... 456
CALCulate<1...2>:LIMit<1...2>:COMMent?
....................................................................... 456
CALCulate<1...2>:LIMit<1...2>:DELete
.............................................................................456
CALCulate<1...2>:LIMit<1...2>:FAIL?
............................................................................... 457
CALCulate<1...2>:LIMit<1...2>:LOWer:SELect
.................................................................. 457
CALCulate<1...2>:LIMit<1...2>:STATe
.............................................................................. 457
CALCulate<1...2>:LIMit<1...2>:UNIT:X?
............................................................................458
CALCulate<1...2>:LIMit<1...2>:UNIT[:Y]?
......................................................................... 458
CALCulate<1...2>:LIMit<1...2>:UPPer:SELect
...................................................................458
CALCulate<1...2>:LIMit<1...2>:BEEP[:STATe]
<State>
This command turns the beeper that beeps if a limit line is violated on and off.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:LIM:BEEP ON
Activates the audio beep.
CALCulate<1...2>:LIMit<1...2>:COMMent?
This command queries the description of a limit line.
This command is a query and therefore has no RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Example:
CALC:LIM:COMM?
Queries the description of limit line 1.
Usage:
Query only
CALCulate<1...2>:LIMit<1...2>:DELete
This command deletes a limit line.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
