Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 53 / 438

Status Reporting System FSE
1065.6016.12 5.34 E-16
Resetting Values of the Status Reporting System
Table 5-12 comprises the different commands and events causing the status reporting system to be
reset. None of the commands, except for *RST and SYSTem:PRESet influences the functional
instrument settings. In particular, DCL does not change the instrument settings.
Table 5-12 Resetting instrument functions
Event Switching on supply
voltage DCL,SDC
Power-On-Status-
Clear
(Device Clear,
Selected Device
Clear)
*RST or
SYSTem:PRESet
STATus:PRESet *CLS
Effect 0 1
Clear STB,ESR

yes
  
yes
Clear SRE,ESE

yes
   
Clear PPE

yes
   
Clear EVENTt parts of the
registers

yes
  
yes
Clear Enable parts of all
OPERation and
QUEStionable registers,
Fill Enable parts of all
other registers with "1".

yes
 
yes

Fill PTRansition parts with
"1" ,
Clear NTRansition parts

yes
 
yes

Clear error queue yes yes
  
yes
Clear output buffer yes yes yes 1) 1) 1)
Clear command
processing and input
buffer yes yes yes
  
1) Every command being the first in a command line, i.e., immediately following a <PROGRAM MESSAGE TERMINATOR>
clears the output buffer.