ROHDE & GRAHL Denuo, Operating Instruction

Page: 5 / 12

EN
In order to simplify the handling of Denuo, we
have created a brief summary of the functions
for you. Warning ! All regulations should be
provided while sitting.
1
Mechanism
To lock the tilt angle of the backrest, turn the
knob on the left side underneath the seat
backwards as far as possible. To unlock the
synchronous mechanism in order to use the
dynamic seating feature, turn the same knob
forwards once and lean back on the backrest as
far as possible. The lock will be released, making
a characteristic sound.
2
Seat height adjustment
To adjust the height of the seat, pull up the lever
on the right side underneath the seat.
3
Seat depth adjustment
To adjust the depth of the seat, pull and hold
the handle on the left side underneath the seat,
slide the seat to the desired position and release
the handle.
4
Seat inclination adjustment
(optional: LP33N-ST)
To set a negative seat angle, turn the knob on
the left side underneath the seat forwards twice.
To lock the seat in this position, turn the knob
backwards once. To disable this function, turn
the knob forwards into the final position.
5 Weight adjustment
To adjust backrest tilt force, turn the knob on
the right side underneath the seat clockwise
(backrest tilt force will increase) or counter
clockwise (backrest tilt force will decrease).
6
4D armrest adjustment
To adjust the height of an armrest, press the
button on the front of the armrest, underneath the
armrest pad. To adjust the width of an armrest,
open the locking lever underneath the armrest,
then move the armrest to the desired position
and lock the lever. To adjust the span of an
armrest pad, move the pad outwards or inwards
until you reach the desired position. To adjust the
depth of an armrest pad, move the pad forwards
or backwards until you reach the desired
position. To change the angle of an armrest pad,
rotate the pad to the inside or to the outside of
the chair, until you reach the desired position.
7 Lumbar support adjustment
If the chair has a lumbar support with adjustable
height, you can adjust the height by moving it
vertically.
8
Castors
Castors compliant with
DIN EN 12 5 29
– with a
load-controlled braking mechanism .
For soft floors: the entire surface of castors is
in one colour.
For hard floors:
a soft tire in a different colour.
Cleaning
Upholstery parts can be cleaned by means of the
appropriate commercial detergents for
upholstery.
Considerations for use
Only use this office swivel chair conventionally
by respecting the general duty of care. Danger of
accident exists in the case of use as an ascent
assistance, sitting on armrests or other improper
use.