2
INTRODUCTION
Congratulations on your purchase decision! We at Rogue Audio truly believe that
our equipment provides the “smartest” value in high-end audio. If you have never
owned a vacuum tube preamplifier you will be thrilled by the silky-smooth sound
and incredible detail that only a tube preamplifier can provide. And with the RP-9
preamplifier, you can be sure that you are getting the very best in tube
amplification. We at Rogue Audio are extremely proud of our products and want
you to enjoy them to their fullest potential. So please, take the time to read
through this short manual so that you can be confident that you have set up your
preamplifier properly.
UNPACKING YOUR PREAMPLIFIER
Tools required:
none
WARNING - This preamplifier uses voltages that could cause injury or
death. Never open the preamplifier while it is plugged in, and always
wait at least 30 minutes after turning the unit off before unplugging the
electrical cord and opening the unit. Lethal voltages can remain in the
electronics after the unit is unplugged.
WARNING – This power connection for this amplifier requires a three
prong grounded outlet. Lethal voltages can be present if amplifier is
not grounded properly.
WARNING – This apparatus must not be exposed to dripping or
splashing water. Do not place any liquid filled objects on this
apparatus.
Your new preamplifier has been painstakingly inspected for cosmetic flaws
during and after assembly. In order not to damage the cosmetic appearance of
your preamplifier it is important that you follow the unpacking instructions
carefully.
1.
Open the shipping carton and remove the box containing the remote control
and power cord from the carton.
2.
Carefully lift the preamplifier out of the carton, and remove the foam pads and
plastic bag.
3.
Save the packing materials. The packing materials and box have been
carefully designed to protect your valuable equipment during shipping so you
don’t want to throw them away.
