15
Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up
Your installation is done!
Your Small Appliance Module is now part of your Smart Home Monitoring
system. Now you can control your small appliances remotely with your
smartphone app and through the Web Control Centre.
Start using this device:
Use your smartphone app or visit the Web Control Centre at
smarthome.rogers.com
to:
·
Turn your appliances on and off remotely.
·
Set up rules such as turning your lights on and off at scheduled times.
·
Learn more about the features of your Smart Home Monitoring system.
How to reset this device:
If you are trying to add your Small Appliance Module to your Smart Home Monitoring system
and you are unable to pair it in the first few attempts, or if you see an error while pairing, try the
following steps to reset the Small Appliance Module and then pair it again.
1.
Remove the Small Appliance Module from the wall outlet.
2.
Press and hold the small white power button as shown on the left.
3.
While holding the button plug the device back into the wall.
The Green LED will come on and when it turns off, release the
button and the Green LED should start blinking. The LED
location is shown on the left.
4.
Now, try the pairing process again.
Troubleshooting:
If the device appears to be functioning improperly, please follow the suggested steps:
1.
Confirm that the device is being supplied from a 120V power source.
2.
Confirm that the device is being controlled in a proper way (local switch is ON).
3.
Ensure that the appliance does not exceed 15A current.
