Assembly Instructions
A.
Attach the Handle (
7
) to the bracket on the Front Post (
6
), and secure with M10 Lock knob (
10
).
Note:
To adjust the position of the handle, turn the lock knob (
10
) anti clockwise to loose the handle
(
7
) as shown in the diagram, and adjust the handle (
7
) to your required position, then secure the lock
knob (
10
).
B.
Connect the two signal Wires from Front Post (
6
) to the two Wires from Handle (
7
).
C.
Put the Left Handle Cover (
15-L
) and Right Handle Cover (
15-R
) into the left and right side of the
Handle (
7
) respectively, and then lock them to Front Post (
6
) using 4 x ST4.2x15mm Philips Screw
(
25
). Please note that the 4 × ST4.2 × 15mm Philips Screw (
25
) are pre-assembled.
D.
Put two Joint Rings (
74
) into the left and right side of the Handle (
7
) respectively, and then tuck them
in the corresponding holes from two sides of the Left & Right Handle Cover (
15L, 15R
).
Step 4
8
74
15L
25
25
6
25
25
74
7
10
15R
Summary of Contents for Gold Bike
Page 26: ...Exploded Parts Diagram 25 ...