Rogerblack 404/8800, Assembly & User Instructions, Page: 12 / 21

MODE: Pressing Mode allows you to change the
display function on the console.
SET: Press to confirm your target time, distance,
pulse or calories.
RESET: Press the Reset key for 3 seconds and all
value will be reset.
1. AUTO ON/OFF
 The system turns on when any key is pressed
or when you start pedalling.
 The system turns off automatically when the
bike has detected no activity for 4 minutes.
2. RESET
The unit can be reset by either changing the
batteries or pressing the MODE key for 3
seconds.
3. MODE
The console will scan through the display
functions. If you want to lock the display to only
look at one function then press MODE when the
required function is flashing.
FUNCTIONS:
1. TIME: Press MODE until TIME is displayed.
Time will now be displayed during your workout.
2. SPEED: Press MODE until speed is displayed.
The current speed will now be displayed during
your workout.
3. DISTANCE : Press MODE until distance is
displayed. The distance will now be displayed
during your workout.
4. CALORIE: Press MODE until Calorie is
displayed. The number of calories burnt will now
be displayed during your workout.
5. ODOMETER : If applicable to your model, press
MODE until odometer is displayed. This will then
show the total distance cycled with this product
since last reset.
6. PULSE : If applicable to your model, press MODE
until pulse is displayed. The user's heart rate in
beats per minute will be displayed during your
workout if holding the hand pulse sensors.
Ensure you wait for 30 seconds to get a reading.
SCAN: The display will change every 4 seconds,
scrolling through time, speed, distance, calories.
BATTERY:
If the display starts to fade, the batteries need
replacing.
Functions and operations
10
11
Computer Operation
11