RFT1000 in RACS 5 User Manual.doc
2017-10-05
9/13
Fig. 7 RFT1000 configuration in RogerVDM software
4.1.4 Inputs
RogerVDM software enables configuration of RFT1000 inputs. Related options are available in the
area
Input lines
, which can be displayed by means of the command
Configuration
in the top menu
of RogerVDM software (fig. 7). When RFT1000 reader is installed in RACS 5 system only the
function
[5]: Card Reader Mode
is applicable. Other available functions are used beyond RACS
systems. In general, input functions of Roger devices depending on assigned functions can be
momentary or constant type. Therefore device may detect only activation of input (momentary
type) or activation and deactivation of input (constant type).
Table 4. Input functions
No.
Function
Type
Description
[0]
None
-
Input line is not used.
