2/2
A
PPENDIX
Fig. 3 Enclosure opening
Fig. 4 Service contacts
Table 1. Screw terminals and wires
Name
Wire
colour
(MCT80M)
Description
12V
Red
Supply plus
GND
Black
Ground
A
Yellow
RS485 bus, line A
B
Green
RS485 bus, line B
IN1
IN1 input line
IN2
IN2 input line
IN3
IN3 input line
IO1
IO1 output line
IO2
IO2 output line
NC
REL1 relay output (NC)
COM
REL1 relay common terminal
NO
REL1 relay output (NO)
Table 2. Specification
Supply voltage
Nominal 12VDC, min./max. range 10-15VDC
Current
consumption
(average)
MCT80M:
~60 mA
MCT82M/MCT82M-IO:
~60 mA
MCT82M-BK/MCT82M-BK-IO: ~45 mA
MCT84M:
~65 mA
MCT84M-BK:
~50 mA
Inputs
Three parametric inputs (IN1..IN3) internally
connected to the power supply plus through a
5.6
kΩ resistor. Approx. 3.5V triggering level for
NO and NC inputs.
Relay output
Relay output (REL1) with single NO/NC contact,
30V/1.5A DC/AC max. load
Transistor outputs
Two (IO1, IO2) open collector outputs, 15VDC/1A
max. load
Tamper protection
Enclosure opening reported to access controller
Proximity cards
13.56MHz MIFARE Ultralight, Classic
Reading range
Up to 7 cm
Distance
1200m maximal cable length for RS485 bus
between controller and reader
IP Code
MCT80M series:
IP65
MCT82M/MCT84M series : IP41
Environmental
class
(according to EN 50133-1)
MCT80M:
Class
IV,
outdoor
general
conditions,
temperature: -
25°C to +60°C, relative humidity:
10 to 95% (no condensation)
MCT82M/MCT84M series:
Class
II,
indoor
general
conditions,
temperature: -
10°C to +50°C, relative humidity:
10 to 95% (no condensation)
Dimensions H x W x D
MCT80M series:
100 x 45 x 16 mm
MCT82M series:
85 x 85 x 22 mm
MCT84M series:
130 x 45 x 22 mm
Weight
MCT80M:
~100g
MCT82M series:
~100g
MCT84M series:
~100g
Certificates
CE
Fig. 5 Connection of readers and expanders to MC16 access controller
Fig. 6 Connection of door lock, door contact and exit button to MCTxx-IO reader
This symbol placed on a product or packaging indicates that the
product should not be disposed of with other wastes as this may
have a negative impact on the environment and health. The user is
obliged to deliver equipment to the designated collection points of
electric and electronic waste. For detailed information on recycling,
contact your local authorities, waste disposal company or point of
purchase. Separate collection and recycling of this type of waste
contributes to the protection of the natural resources and is safe to
health and the environment. Weight of the equipment is specified in
the document.
Contact:
Roger Sp. z o. o. sp. k.
82-400 Sztum
Gościszewo 59
Tel.: +48 55 272 0132
Fax: +48 55 272 0133
Tech. support: +48 55 267 0126
E-mail:
Web: