MC16-RAW-KIT Installation Manual.doc
2019-05-13
2/2
NO1, COM1, NC1
30V/1.5A DC/AC (REL1) relay
NO2, COM2, NC2
30V/1.5A DC/AC (REL2) relay
Table 2. MC16 LED indicators
Name
Description
LED1
Normal mode
LED2
Service mode
LED3
Pulsating: Low level configuration error
ON: High level configuration error
LED4
No memory card or memory card error
LED5
Event log error
LED6
License error
LED7
Not used
LED8
Pulsating: Proper functioning of the controller
Table 3. Specification
Supply voltage
230VAC, 50/60Hz (-
15%÷+10%)
Transformer
TRP40 18VAC/40VA
Short circuit and overload
protection
Transformer fuse
Metal box
DC01 0.7mm metal sheet, white colour (RAL9003)
Tamper protection
NO/NC detector, 50VDC/50mA
Distances
Up to 1200 m between kit and readers
IP Code
IP20
Environmental class
(acc. to EN 50133-1)
Class I, indoor general conditions, temperature:
+5°C to +40°C, relative humidity: 10 to 95% (no
condensation)
Dimensions H x W x D
255 x 255 x 90 mm
Weight
3 kg
Certificates
CE
Fig. 2 Typical door control with MC16-RAW-KIT and MCT-IO readers
Notes:
MC16-RAW-KIT depending on uploaded license can control from 1 to 16 doors
on condition that the maximum number of MCT readers on its RS485 bus
cannot exceed 16.
All MCT readers connected to the RS485 bus must have unique addresses in
range of 100-115.
Inputs and outputs for door control are available at MCT-IO readers.
In case of read-in/out door, except for MCT-IO reader (e.g. MCT82M-IO)
additionally MCT reader (e.g. MCT82M) is connected to RS485 bus of the
controller.
Depending on applied concept, the power supply can be provided with multiple
buffer PSUs or single buffer PSU considering at least 0.85A current per door.
Other installation scenarios are presented in AN002 application note which is
available at
This symbol placed on a product or packaging indicates that the
product should not be disposed of with other wastes as this may
have a negative impact on the environment and health. The user is
obliged to deliver equipment to the designated collection points of
electric and electronic waste. For detailed information on recycling,
contact your local authorities, waste disposal company or point of
purchase. Separate collection and recycling of this type of waste
contributes to the protection of the natural resources and is safe to
health and the environment. Weight of the equipment is specified in
the document.
Contact:
Roger Sp. z o. o. sp. k.
82-400 Sztum
Gościszewo 59
Tel.: +48 55 272 0132
Fax: +48 55 272 0133
Tech. support: +48 55 267 0126
Web:
