1. If positioning the Rod Holders (3) topside of the Dovetail
Tube Assembly (2), it is possible to slide the Rod Holders
from the Suction Mount end, proceed to step 4
4. Attach one suction mount to rear side window. Be sure
suction cups and windows are clean. Apply pressure to
the suction mount against the window. Be sure to press
the PRESS button down
fi
rmly while
fl
ipping the lever up
2. To position Rod Holders (3) below the tube, remove the
Tube Stop (requires philips screwdriver). Slide Rod Holders
on and replace Tube Stop.
3. Insert Telescopic Tube (1) into each Dovetail Tube
Assembly (2)
3
5. Attach opposite suction mount and tighten wing nut
6. Adjust Telescopic Tube (1) as required and re-position
Rod Holders (3) if necessary. Tighten all 4 Thumbscrews (4)
4
SECTION B - ASSEMBLING REAR ASSEMBLY.
POSITIONING ROD HOLDERS TO LARGE TUBE
7. IMPORTANT! Do not place suction mounts on the defog
resistive conductors. The conductors, if applied on the
window, will prevent the suction mounts from maintaining
a vacuum.
