RODIX INCORPORATED
2316 23
rd
Ave., ROCKFORD IL 61104
TOLL FREE (800) 562-1868, FAX (815) 316-4701
E-mail [email protected]
www.rodix.com
FEEDER CUBE
24-210 (120V) and 24-211 (240V) Control Board for FC-40
Plus Series
General Purpose Model
IMPORTANT: APPLICATION NOTE
INSTRUCTIONS FOR REPLACING A 24-480/481 or 24-488/489 with 24-210/211 BOARD.
1. DISCONNECT INCOMING POWER TO THE CONTROL!
2. RECORD THE 60/120 SWITCH SETTINGS.
3. RECORD SOFT START TRIMPOT SETTING.
4. LABEL EACH CIRCUIT BOARD WIRE WITH THE TERMINAL NUMBER.
5. REMOVE WIRES FROM OLD CIRCUIT BOARD.
6. REMOVE OLD CIRCUIT BOARD.
7. INSTALL NEW CIRCUIT BOARD.
8. REWIRE NEW CIRCUIT BOARD ACCORDING TO THE WIRE NUMBERS.
9. SEE SAMPLE WIRING DIAGRAMS FOR REFERENCE.
10. REMOVE TEMPORARY WIRE LABELS.
11. ADJUST THE SWITCH AND TRIMPOT SETTINGS TO MATCH THE OLD CIRCUIT BOARD.
12. RECONNECT POWER TO THE CONTROL.
13. SET UP NEW CONTROL BOARD USING THE APPLICATION NOTE.
Note 1: Wiring diagrams for specific control models can be downloaded from www.rodix.com.