RODEX RDX307, Instruction Manual

Page: 12 / 30

11
(2) Operation
1. Insert the plug into the supply socket.
2. Press switch button, the machine
3. You can adjust the airflow by pushing the slider block upward and downward.
5. Protective device
Special instruction concerning protective device.
(1)
When the water in the barrel is full, the device begins to work.
The suction power will vanish at this moment. The machine will make some noise which indicates
the motor is running at a high speed.
Under this circumstance, you should cut off the electricity, and clean out the water. Then equip the
machine and turn it on, it will begin to work normally.
(2)
When the machine was overturned, the device will become to work. You should
cut off the electricity and make it upright, then turn on the machine.
(3)
When the device is working, the motor will be damaged and cause fire if you use
the machine. Under this circumstance, you should stop using and clean out the water, then you can
begin to use it.
6. Maintenance
(1) Barrel Cleaning
* After working or when the barrel is full of dust which causes suction decrease considerably, you
should cut off the electricity and clean the dust away from the barrel.
1) Unfasten the locking knob, lift up the top cover.
2) Take off the filter bag, clean the dust away in the dust barrel.
3) Install the filter bag back and place the top cover.