1
. INPUTS - OUTPUTS - CONTROLS
1
1. RCA inputs
(CH1/2, CH3/4, CH5/6, left and right
channels). Line inputs for connection with RCA line-out’s
of the head-unit
2. Input gain control
, LEVEL adjustment for channels
CH1/2. Used to match the RCA line output voltage of the
head-unit to the amplifier input section
3. Operation mode selector
, slide switch to select
highpass or fullrange operation of the active crossover for
channels CH1/2
4. Highpass crossover frequency control
, to adjust the
cut-in frequency of the channels CH1/2
5. Input gain control
, LEVEL adjustment for channels
CH3/4. Used to match the RCA line output voltage of the
head-unit to the amplifier input section
6.
Operation mode selector
, slide switch to select
highpass, bandpass or fullrange operation of the active
crossover for channels CH3/4
7.
Highpass crossover frequency control
, to adjust the
cut-in frequency of the channels CH3/4
8.
Lowpass crossover frequency control
, to adjust the
cut-off frequency of the channels CH3/4
9.
Input gain control
, LEVEL adjustment for channels
CH5/6. Used to match the RCA line output voltage of the
head-unit to the amplifier input section
10.
Operation mode selector
, slide switch to select
highpass, bandpass or fullrange operation of the active
crossover for channels CH5/6
11.
Highpass crossover frequency control
, to adjust the
cut-in frequency of the channels CH5/6
12. Lowpass crossover frequency control
, to adjust the
cut-off frequency of the channels CH5/6
13.
Slide switch
to activate/deactivate the phase-shift
control feature of channels 5/6
14. Phase-shift control
, to alter the acoustical phase of the
out-put signal from 0 - 180°
15.
Operation LED
, is lit blue when power is on
16. Protection LED
, is lit red when the amplifier is in
protection mode because of malfunction, overheating or
short-cut on speaker cable leads
17. Terminal block
for the speaker wire connection
18. Fuses
19.
"+12V"
for connection to the positive terminal of car
battery
20.
"GND"
for connection to chassis ground or negative
terminal of car battery
21. "REM"
for the automatic (remote) turn-on / turn-off of the
power amplifier from the head-unit's remote or antenna
control lead
Ro 6-CH ME.indd 19
27.02.2006 18:15:45 Uhr
