Wireless Go User Guide V01
RØDE MICROPHONES – MAY 2019
RECEIVER – RX
Power Button
Press and hold the power button for 3
seconds to turn on the unit
Press and hold the power button for 3
seconds to turn off the unit
Single press to turn on when the device is in charging mode
Single press when the device is switched on
to change screen brightness mode.
Bright mode – Screen stays illuminated while in use
Dim mode – Screen dims after 3 seconds
“dB” Button
Press the “dB” button to cycle through the three
audio output levels (0dB, -6dB, -12dB)
Set the level according to the requirements
of the device recieving the audio. i.e portable
recorder, smartphone, camera, etc.
The RX will remember the selection chosen for future use
Link Button
The RX and TX will come pre-paired out of the box
If pairing is required
Press and hold the button for 3 seconds
The signal strength icon on the screen will start
fl
ashing
Single press the power button on the TX
The TX and RX should pair immediatkey
Audio output
Standard 3.5mm TRS output
Multi-mono signal
USB-C
Standardised USB-C port
Used for charging with USB power supplies and is able
to connect to a computer for future
fi
rmware updates
The screen will display charging mode if the unit
is plugged into power while off, a quick single
press the power button will turn on the RX
RX
TX
Power Button
USB-C
TRS Output
Pair Button
dB Button
Transmitter battery status
Receiver battery status
Microphone input level
meter (red = clipping)
Pairing status & signal
strength indicator
Audio output level
3x options
Screen Brightness Indicator
Summary of Contents for WIRELESS GO
Page 1: ...U S E R G U I D E...
