The
PSA1 offers a choice of two desk mounting options, using either the
desk clamp or desk insert.
Mounting via the Desk Clamp
1- Unscrew the clamp so that the opening is large enough to fi t over the edge of
your
table.
2- Push the clamp all the way onto the table edge for maximum security.
3- Fasten the clamp to the desk by turning the handle so that it is tight against the
underside of the table.
Note:
Make sure that the clamp sits fl ush on both the top and bottom surfaces
of the table. If this can not be achieved, we recommend you mount the studio
arm via the desk insert (refer to ‘Mounting via desk insert’).
4- Test that you have mounted the clamp securely by seeing if you can pull it off
the edge of the table. Tables with round edges provide less security than those
with square edges. If the clamp comes off easily, try reattaching it tighter and
repeat the test. If it still removes easily, we recommend that you mount the
studio arm via the desk insert (refer to ‘Mounting via desk insert’).
5- Insert the arm into the hole at the top of the clamp. You are now ready to attach
your
microphone.
STEP 1 & 2
STEP 3
STEP 4
Setting up the PSA-1 studio arm
