7
RODCRAFT PNEUMATIC TOOLS
4. Maintenance
Generally for the device maintenance the environmental regulations of the respective country are to be observed.
After first year, disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
Always ensure that the machine is disconnected from energy source (compressed air) to avoid accidental operation.
To keep downtime to a minimum, use repair kit define in parts list.
Motor Lubrication
•
1. Only use RODCRAFT accessory air oil
2. Clean air intake nipple before use
3. Fill air oil (approx. 3 drops) into the air intake nipple and briefly operate the machine.
•
Follow abovementioned steps before and after using the machine. This increases the machine‘s service life.
EN
Visit our Internet presence at www.rodcraft.com
Here you can also download our manuals.
With further questions contact your nearest Rodcraft branch or the authorized dealer.
RC2205
RC2205RE
RC2206RE
Serial: 00501 to 99999
Origin of the product:
Made in China
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating :
to „Machinery“:
2006/42/EC (17/05/2006)
applicable harmonised standard(s) :
EN ISO 11148-6:2010
Technical File
available at the
EU Technocenter
CP
ZAC de la Lorie -38, rue Bobby Sands, B.P10273
44818 Saint-Herblain Cedex, France
Place and date
of issue:
44818 Saint-Herblain,
France
01.06.2012
Company name
and address:
Rodcraft Customer Center
Langemarckstr.35 bis
45141 Essen- Germany
Bruno Blanchet
General Manager
We hereby declare that the following described machine complies with the general safety and health requirements of below mentioned EU directives due to its design and
conception and the type circulated by ourselves. This declaration becomes invalid if the machine is modified without our approval.
Valid for:
EC DECLARATION
5. Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
Repair only by technical maintenance staff.
Use the equipment only for its intended use as described above, any other use is expressly excluded! We are not responsible for injuries
and damage due to inappropriate use and misuse and/or noncompliance of safety precautions; this is not covered by the warranty.
•
Check clutch oil once each month. Use 1.35 oz. (40ml) of SAE #30 oil or equivalent.
