Rodania eta cal. G15.211, International Warranty & User'S Manual, Page: 57 / 148

www.rodania.com l 57
RONDA CAL. 5020.B
(continue)
SETTING THE TIME
Please note: * in order to set the time to the exact second , must be pulled out when the second hand is in position
“60”(|). Once the hour and minute hands have been set, must be pushed back into position I at the exact second.
SETTING THE DATE (QUICK MODE)
Please note: During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following
day. An extreme acceleration in setting the date with quick mode can induce a false date indication. The synchronization
is re-established by setting the date from 01 till 31 (crown in position
II ).
Pull out the crown to position III
(the watch stops).
Turn the crown until you reach the
correct time
08:45 .
Push the crown back into position
I
.
Pull out the crown to position II
(the watch continues to run).
Turn the crown until the correct date
appears.
Push the crown back into position
I .
SECOND HAND