Product Interface
Remote Control
Remote control
Multiple control modes, RS232, RS485, network
and USB can be used to control the camera.
Intelligent Exposure
Effectively solve the impact of projection, TV and
other equipment on the shooting of people
1.
RESTORE
2.
HDMI
3.
3G-SDI
4.
LINE IN
5.
RS485
6.
USB
7.
RS232 OUT
8.
RS232 IN
9.
LAN(PoE+)
10.
DC 12V
11.
ON/OFF
ON
1
3
4
5
6
7
8
9
2
10 11
RESTORE
HDMI
3G-SDI
LINE-IN
RS485
USB
OUT
IN
LAN(PoE+)
RS232
DC12V
OFF
1.(Standby) Key
Press to enter standby mode. Press again to resume
to normal mode.
2.Numeric Key:
To set preset or call preset.
3.* Key:
Use with other keys.
4.PRESET Key
Set preset: Store a preset position.
[PRESET] + Numeric key (0-9): Set the preset position.
5.HOME Key
Confirm selection or press to turn the lens back to
the middle position.
6.(Return) Key:
Press to return to the previous menu.
7.ZOOM Key
9.FOCUS Key
Press [AUTO] to adjust the focus automatically.
Press [MANUAL] to adjust the focus manually.
When in manual focus mode, press [FAR] to focus
on far object or [NEAR] to focus on near object.
8.L/R SET Key
10.CAMERA SELECT Key
Press the button corresponding to the camera
you want to operate with the remote controller.
Use with other buttons.
12.Auto Tracking Key
[F1]: Not enabled
[F2]: Not enabled
[F3]: Start AI Intelligent Tracking
[F4]: Stop AI Intelligent Tracking
15.MENU Key
Enter or exit OSD MENU.
17.P/T RST (PTZ Reset) Key
16.BACKLIGHT Key
Backlight ON/OFF: Press repeatedly to
enable or disable the backlight compensation.
14.PTZ Control Key
After zooming, press arrow button to perform
panning and tilting. Press [HOME] button to
face the camera back to front.
11.# Key
