E10356-110615
MB-3TL
Page 10
4.3 SENSOR INFO
The dialog box lets you set a default sweep frequency and temperature device. Note that
both settings can be changed via the recorder’s keypad.
Sweep frequency: Choose a default sweep frequency. Most sensors use the "C"
sweep, but yours may not. You can find a list of sensors and recommended sweep
frequencies in Section 2, "Taking Readings".
Default temperature device: Choose Thermistor. This choice affects the Type menu.
Choosing Temperature makes Hz, Hz
2
, and uStrain with Thermistor appear first.
4.4 STANDBY DELAY
This setting controls how long the recorder waits before going into standby mode. For
example, if you choose 30 minutes, the recorder will wait 30 minutes after the last key
press before going into standby mode. Note that the standby mode still requires power,
so when you are finished taking readings, always switch the recorder off.
4.5 SET CLOCK
Click the "Match Computer" button to synchronize the recorder’s clock with your
computer’s clock.
To set a different time, click in the date and time fields, type in values, and click OK. The
date display format in the dialog box is controlled by the short date setting in Windows
(Control Panel > Regional Settings > Date).
5 RETRIEVE READINGS
5.1 OVERVIEW
1. Connect the MB-3TL to your PC.
2. Start Roctest MB-3TL Manager program.
3. Choose Retrieve Readings.
4. Save the data in a file.
5. Clear the data recorder’s memory.
5.2 RETRIEVE DATA
1. Click the "Retrieve Readings" button. The Manager program performs some
checks and then displays a progress counter.
2. The Manager program then displays the retrieved readings in tabular form.
