Connecting the Drive
1.
Turn ON your computer and wait until it fully boots up to load all programs.
2.
Using only one interface cable at a time, select the interface port you wish to use on your computer. When using
FireWire, connect one end of the FireWire cable to the appropriate FireWire port (FW800 or FW400) of your
computer and then the other end to the FireWire port in the Airhawk. When using USB, connect two ends of the
USB “Y” cable to the USB ports of your computer (or via Power Hub that is connected to your computer) and then
the other end to the USB port in the Airhawk. Upon connection, a Blue light on the Airhawk drive will turn ON.
3.
The Hard drive is preformatted for Plug-and-Play operation. After a few seconds a Rocstor HD icon will show
on “My Computer” folder under the Windows OS. Under the Mac OS, the Rocstor HD icon will appear on the
“Desktop.”
4.
Click (double click) on the Rocstor HD icon to access the drive.
*You may also refer to the Rocstor website to view or download a full version of the Airhawk A9 manual. www.ROCSTOR.com
FireWire
800
FireWire
400
USB
USB 2.0
FireWire 800
or
or
FireWire 400
ROCSTOR
|
AIRHAWK A9
quick installation guide
Page \ 3