6
Automatic mode
Up to 16 feedback modules 10787 can be connected to the “Bus Out” jack. These are required for automatic
operation of the model train set. The number of required feedback modules is calculated as follows: Ideally
you require 2 acknowledgement inputs per track block with each feedback module having 8 inputs.
Meaning of the LEDs (light-emitting diodes)
Green LED inscribed COMM (Communication):
indicates the data traffic between interface and PC via the serial interface in normal operation.
flashes together with the red LED if no master mouse is connected.
Red LED with the inscription PROG (Programming / Error):
the red LED flashes during the programming process (CV values reading or writing).
the red LED flashes if there is no connection to the PC.
the red LED flashes jointly with the green LED if no master mouse is connected.
CD content
Program files:
rmsetup.exe:
The installation file for Rocomotion
tpsetup.exe:
The installation file for TrainProgrammer
TM
tasetup.exe:
The installation file for TrainAnimator
TM
If you have started one of the above mentioned programs you can select the language.
All programs are available in German and English.
Documentation:
Handbuch.pdf:
Rocomotion program description (in German)
Manual-pdf:
Rocomotion program description (in English)
Following installation of the respective program (Rocomotion, TrainProgrammer
TM
or TrainAnimator
TM
) you will
receive additional assistance via the context-sensitive help function.
Decoder configuration file:
Roco D.yrc:
Decoder configuration file for the German version of the TrainProgrammer
TM
1230,,0
Loc
omotive library:
In the sub-menu locomotive library you already find a selection of ROCO models which were prepared for
Rocomotion. With the help of TrainAnimator
TM
you can also generate your own yra files.
Miscellaneous:
Starting page
The operating instructions you are currently reading can also be found on the enclosed CD in PDF format.
Installing the program files software:
After inserting the CD the starting page in your browser will start automatically. Should you have deactivated
the Autostart mechanism call up the file start.htm.
Rocomotion
1. Click on Rocomotion installation link in the starting page or start rmsetup.exe.
2. Confirm language selection and licence conditions.
3. Confirm installation path and start menu entry or adjust if required.
TrainProgrammer
TM
:
1
. Click on TrainProgrammer
TM
installation link in the starting page or start tpsetup.exe.
8010785920 XII_2007.indd 6
23.01.2009 09:15:43
