28
28
72265
78265
72262
78262
▪
Operation with a DCC Command Station
(
MULTI
MAUS®)
As the (MULTI
MAUS®
) has 20 function keys and a light button, can be especially comfortably
operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend:
direct CV programming (byte by byte) or POM mode (programming on main
track).
The programming is described in the MULTI
MAUS®
manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21 /z21 / z21start), you can read the value byte by byte
and bit by bit.
▪
More Functions
You can find out about a range of other possible set-tings, which are probably very rarely needed,
relating to drive speed curve, load control setting or noise synchronization from the detailed
handbook. This can be downloaded as a pdf document MX6452P22 from www.zimo.at.
CV
Name
Value
Default
Value
13
Analogue modes F1 - F8
(00 – no function in analogue
mode)
01
– Function F1
02
– Function F2
04
– Function F3
08
– Function F4
16
– Function F5
32
– Function F6
64
– Function F7
128
– Function F8
Attention!
Several things happen at the same time when se-
veral functions are activated via CV’s in analogue operation.
00 – 255
1
14
Analogue modes F9 - F12
01
– Locomotive headlight (front)
02
– Locomotive headlight (rear)
04
– Function F9
08
– Function F10
16
– Function F11
32
– Function F12
00 – 255
195
17+
18
Long address
(requirement: corresponding CV29 long
address setting is activated)
100 – 9999
29
Settings
14
266 Total Volume of all Sounds
00 – 255
64
8072264920.indd 28
20.03.2018 14:43:28