3. Installation
1) Mounting Guidelines
For the best performance, select the proper location for the unit where it has a
direct view of the road. The radar antenna is located behind the rear panel of the
unit and the laser detection lenses are located behind the rear panel of the unit and the front
window. The antenna and sensors should not be obstructed by metal or metallic surfaces and
should be pointed at the horizen for accurate long range detection
-
Choose a location that does not block the driver
’
s vision.
-
Mount the detector in a level position.
-
Do not mount the detector behind metal surfaces, windshield antenna, wiper blades,
ornaments, or mirrored glass.
-
Heated windshields, currently available as an option on some Ford(Instaclear) or
GM(electriclear) vehicles act as an impenetrable barrier to radar signals.
-
Do not mount the detector where the driver or passenger might collied in the
case of an abrupt halt.
Note : Whichever mounting method you choose, remember to place the radar detector
out of view when you leave your vehicle. This keeps the detector out of sight
from thieves and prevents exposure to extremely high temperatures.
Note : If necessary, you may adjust the bracket to the proper angle by bending it. To
remove your detector pull up the detector from the front pulling it towards you.
Caution : On some newer model cars, a plastic safety coating has been applied to the
windshield. The suction cups may leave permanent marks on the windshield once they
are removed. Check your vehicle owner
’
s manual to see if your car
has the plastic safety coating.
2) Mounting Types
