Set the locking storage box back in place and install all mounting
screws through the mounting tabs into the floor and in the “B” pillar. Be
careful not to overtighten the screws.
To set your new Combi-Cam lock to your desired 3 digit combination,
simply slide a paper clip into the hole on the side of the knob while the
lock is set to all zeros. While the wire is inserted, choose your personal
combination and pull the paper clip wire out. That’s all there is too it.
If you ever want to change your combination, just enter your current
combination, slide a paper clip into the hole, select your new code and
pull the wire out.