4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
BURSTING HAZARD!
• Do not exceed 90 psi (6.2 bar) of tool inlet pressure. Permanent tool
damage and/or explosion could occur and cause personal injury.
INJURY HAZARD!
• This tool has high-speed, rotating components which can quickly cause
severe injury. Keep fingers and hands away from moving parts when
operating. Wear thick, well-fitting work gloves and keep loose clothing,
sleeves, cords, jewelry and hair away from moving parts.
• This tool could eject sparks at high speed which can ignite flammable
materials or injure others nearby. Do not operate near flammable materials
and keep all persons and pets away from the work area.
• Hold drill securely while in use as the drill body can suddenly kick back,
twist or rotate causing severe hand or wrist injury. Wear thick, well-fitting
work gloves. Do not force drill or exert excessive side forces on tool. Drill
bits can suddenly break with excessive side force.
• Always make sure the workpiece is securely clamped or anchored to
avoid sudden movements which could result in injury.
• Always disconnect Drill from air supply when changing drill bits or
accessories to prevent accidental tool starting and potential serious injury.
• Frequently inspect Chuck and overall tool condition. If damage is discov-
ered, discontinue tool use immediately. ONLY USE drill bits or accessories
rated for 2,500 RPM or greater use otherwise serious injury can result in
the event of failure.
VIBRATION INJURY HAZARD!
• This Drill will vibrate during use! Repeated exposure to vibration may cause
physical injury.