OSCILLATING TOOL
ENG
7
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot while
working, presenting danger of burns!
Make sure the tool is unplugged prior to
changing accessories.
Before working with your tool make sure
that no power cords will be damaged.
High oscillation frequency.
Low oscillation frequency.
TECHNICAL DATA
Type Designation: RK682 RK682.X (6-designation
of machinery, representative of SoniCrafter)
RK682 RK682.X
**
Rated voltage
120 V ~ 60 Hz
Amps
3.5 A
Oscillations speed
11000-20000/min
Oscillations angle
4°
Protection class
/II
Tool weight (without power
cable)
3.09 lbs
**
X may be followed by one or two characters. All
models are the same except model number and
trademark. The suffix in models may be number from
“1” to “999” or English letter “A” to “Z” or “M1” to”
M9” which means different package or the various of
accessories packed in the package
.
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
Assembly and Operation
Action
Figure
Mounting Accessories
See Fig. A-C
Mounting the Sanding Sheet
See Fig. D
Operating the On/Off Switch
See Fig. E
Using the Variable Speed Dial
See Fig. F
The Variable Speed Dial can be used to set the optimum
oscillating frequency according to the accessories used
and the respective application.
Oscillation
frequency
Application
High oscillation
frequency
Sanding, sawing, rasping and
polishing stone and metal.
Low oscillation
frequency
Scraping, polishing varnishes.
WORKING HINTS FOR YOUR TOOL:
If your power tool becomes too hot, especially when
used at low speed, set the speed to maximum and run
it with no load for 2-3 minutes to cool the motor. Avoid
prolonged usage at very low speeds.
Always keep the blade sharp.
