CORDLESS LAWN MOWER
EN
14
WHEN SHARPENING THE BLADE:
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade,
removing equal amounts of material from both
ends.
TO SHARPEN BLADE IN A VISE (See Fig. K)
1. Be sure the switch lever is released, the blade
has stopped and the safety key removed before
removing the blade.
2. Remove blade from mower. See instructions
for removing and attaching blade (BLADE
MAINTENANCE).
3. Secure blade K-1 in a vise K-2.
4. Wear safety glasses and be careful not to cut
yourself.
&DUHIXOO\ÀOHWKHFXWWLQJHGJHVRIWKHEODGHZLWKD
ÀQHWRRWKÀOH.RUVKDUSHQLQJVWRQH
6. Check balance of blade. See instructions for blade
balancing.
7. Replace blade on mower and tighten securely.
Refer to instructions below.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing center hole in blade
L-1 over a nail or screwdriver shank L-2, clamped
horizontally in a vise L-3. If either
HQGRIWKHEODGHURWDWHVGRZQZDUGÀOHWKDWHQG%ODGH
is properly balanced when neither end drops.
BLADE MAINTENANCE (See Fig. M1, M2)
Renew your metal blade after 50 hours mowing
or 2 years, which ever is the sooner-regardless of
condition.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the blade.
Hold the blade (14) and unscrew the blade bolt (13)
counter-clockwise using a spanner wrench, and then
remove blade.
To re-assemble, double check blade washer and blade
À[HGFRUUHFWO\VHH)LJ07KHQSRVLWLRQWKHEODGH
(14) with the cutting edges towards the ground. Then
securely tighten the blade bolt (13).
IMPORTANT BATTERY INSTRUCTIONS
READ USERS MANUAL PRIOR TO USE
1. Fully charge battery after each use.
2. Make sure the battery is fully charged before
storage.
3. Charge the battery every two months during
storage.
4. At all times, keep the battery in the upright
positions.
STORAGE: (See Fig. N)
Stop the mower and always remove the safety key.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its side and clean the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, release the handle cam lever, and
rotate or fold the upper handle.
Staple your purchase
receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AUSTRALIA PTY LIMITED
ABN 14 101 682 357
Unit 15, 23 Narabang Way Belrose 2085 NSW Australia
FREE CALL 1300 889 028
(0$,/RIÀFHVDOHV#SRVLWHFFRPDX
Summary of Contents for Shopseries RS8065
