background image

Chain Saw Sharpener 

 en

7

Use good quality accessories marked with a well-

known brand name. Choose the type according 

to the work you intend to undertake. Refer to the 

accessory packaging for further details. Store 

personnel can assist you and offer advice.

SafeTY inSTruCTiOnS

 

 

warning!  

When using electric tools basic 

safety precautions should always be followed 

to reduce the risk of fire, electric shock and personal 

injury including the following.

read all these instructions before attempting to 

operate this product and save these instructions.

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

Children should be supervised to ensure that they 

do not play with the appliance.

Safe OperaTiOn

1.  Keep work area clear

-   Cluttered areas and benches invite injuries.

2.  Consider work area environment

-   Do not expose tools to rain.

-   Do not use tools in damp or wet locations.

-   Keep work area well lit.

-   Do not use tools in the presence of flammable 

liquids or gases.

3.  Guard against electric shock

-   Avoid body contact with earthed or grounded 

surfaces {e.g. pipes, radiators, ranges, 

refrigerators).

4.  Keep other persons away

-   Do not let persons, especially children, not 

involved in the work touch the tool or the 

extension cord and keep them away from the 

work area.

5.  Store idle tools

-   When not in use, tools should be stored in a dry 

locked-up place, out of reach of children.

6.  Do not force the tool

-   It will do the job better and safer at the rate for 

which it was intended.

7.  Use the right tool

-   Do not force small tools to do the job of a heavy 

duty tool.

-   Do not use tools for purposes not intended; for 

example do not use circular saws to cut tree 

limbs or logs.

8.  Dress properly

-   Do not wear loose clothing or jewellery; they can 

be caught in moving parts.

-   Non-skid footwear is recommended when 

working outdoors.

-   Wear protective hair covering to contain long 

hair.

9.  Use protective equipment

-   Use safety glasses.

-   Use face or dust mask if working operations 

create dust.

10. Connect dust extraction equipment

-   If the tool is provided for the connection of dust 

extraction and collecting equipment, ensure 

these are connected and properly used.

11. Do not abuse the cord

-   Never yank the cord to disconnect it from the 

socket Keep the cord away from heat, oil and 

sharp edges.

12. Secure work

-   Where possible use damps or a vice to hold the 

work. It is safer than using your hand.

13. Do not overreach

-   Keep proper footing and balance at all times.

14. Maintain tools with care

-   Keep cutting tools sharp and clean for better and 

safer performance.

-   Follow instruction for lubricating and changing 

accessories.

-   Inspect tool cords periodically and if damaged 

have them repaired by an authorized service 

facility.

-   Inspect extension cords periodically and replace 

if damaged.

-   Keep handles dry, clean and free from oil and 

grease.

15. Disconnect tools

-   When not in use, before servicing and when 

changing accessories such as blades, bits and 

cutters, disconnect tools from the power supply.

16. Remove adjusting keys and wrenches

-   Form the habit of checking to see that keys and 

adjusting wrenches are removed from the tool 

before turning it on.

17.  Avoid unintentional starting

Summary of Contents for ShopSeries RS8000














Reviews: