Rockwell ShopSeries RS5105, Manual, Page: 10 / 16

96W Multi ShaRpeneR en
10
SyMbOlS
To reduce the risk of injury, user must read
in struction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
RCM approval mark
teChniCal data
Rated voltage
Rated power
No load speed
Max. wheel diameter
Drill Diameter
Chisel and plane blade width
Protection class
Machine weight
230-240V~50Hz
96W S3 (30%)
1350/min
56mm
3mm-13mm
6mm-51mm
/II
1.2kg
OpeRatinG inStRuCtiOnS
nOte: Before using the tool, read the
instruction book carefully.
This multi-task sharpener tool includes three
working modules:
HSS drill sharpener — Sharpens all high speed steel
drill bits from 3mm to 13mm.
Knife & Scissor Sharpener — Sharpens all straight
edged knives & scissors.
Chisel & plane sharpener — Regrinds chisel & plane
blades from 6mm to 51mm wide.
1. SWitChinG On and Off (See fig. a)
WaRninG: This electric multi-sharpener shall
be fixed on the stable position before use.
To switch on, move the on/off switch (11) to the “I”
position.
To switch off, move the on/off switch to the “O”
position.
2. ShaRpeninG hSS bitS
WaRninG: Before assembling the HSS drill
sharpener (2), be sure the tool is unplugged
and the on/off switch (11) is in ‘’O’’ position.
1) Slide the module labeled High Speed Steel Drill
Sharpener onto the power unit. (See Fig. B1, B2)
2) Remove the clamp (3) from the clamp holder
and insert the HSS drill bit (4) to be sharpened.
Rotate the clamping ring (5) in clockwise
direction to tighten the clamp lightly to leave the
drill bit still free to move. (See Fig. C1, C2)
3) Place the clamp containing your drill bit into the
setting slot (6), using the grooves in the side to
lower it in correctly. (See Fig. D1, D2)
4) Move the drill bit forward up so that it lays in the
“V” guide and touches the metal end stop. (See
Fig. E)