Rockwell ShopSeries RS2113, User Manual

Page: 6 / 8

LED toRch EN
6
SyMBoLS tEchNIcaL Data
Battery voltage
Charger voltage
Charging time
Machine weight
Battery capacity
12V
100-240V~ 50Hz
1 hr
0.25kg
1.3 Ah Li-Ion
oPERatINg INStRuctIoNS
NotE: Before using the tool, read the
instruction book carefully.
1. REchaRgINg BattERIES
a) chaRgINg thE BattERy
The battery charger supplied is matched to the Li-ion
battery installed in the machine. Do not use another
battery charger.
The Li-Ion battery is protected against deep
discharging. When the battery is empty, the machine
is switched off by means of a protective circuit: The
tool holder no longer rotates.
In a warm environment or after heavy use, the battery
pack may become too hot. Allow time for the battery
to cool down before recharging.
waRNINg: Do not continue to press the On/Off
switch after the torch has been automatically
switched off. The battery can be damaged.
b) IMPoRtaNt NotES FoR chaRgINg thE BattERy
The battery in your new tool is not charged when it
leaves the plant. Therefore it must be charged for 1
hour before using the first time!
NotE: If the battery pack is very hot you must remove
your battery pack from the charger and allow your
battery pack to cool first to ambient temperature and
then recharging can be started.
To prevent damage to the Battery Pack, when charge
runs out, please charge the battery to reach full or no
less than half charge before storage.
If the tool will not be used for long periods of time,
charge the battery every 3-6 months
c) chaRgINg (See Fig. a)
1) Plug the charger into an appropriate outlet. The
light (a) will be green.
2) Insert the Battery Pack (4) into the charger, the
light (b) will be red and flash to indicate the
charging process has started.
3) On completion of charge, the light (a) is green, and
light (b) will illuminate red, and won’t flash. The
pack is now fully charged, unplug the charger and
remove the battery pack.
Li-Ion
Li-Ion
To reduce the risk of injury, user must read
instruction manual
Warning
For indoor use only
C-tick marking
Li-Ion battery. This product has been
marked with a symbol relating to ‘separate
collection’ for all battery packs and
battery pack. It will then be recycled or
dismantled in order to reduce the impact
on the environment. Battery packs can
be hazardous for the environment and
for human health since they contain
hazardous substances.
Do not burn
Batteries may enter water cycle if disposed
improperly, which can be hazardous
for ecosystem. Do not dispose of waste
batteries as unsorted municipal waste.
Fuse
T2A time lag fuse with rated current of 2A
Positive terminal
Negative terminal